1U 小型架式支架
1U Small Rack Mount Shelf
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed a solid, sturdy shelf to mount things like a modem or fiber ONT. I saw the others on here, but wanted it solid so I could drill holes for captive screws to hold the equipment vs messy zip ties or hook and loop. My finished product turned out great in both PLA and ABS. In cramped or warmer cabinets I recommend ABS as the PLA will likely warp over time. PETG would probably work too, but I haven't tried it.
It is highly compatible with a Calix GigaPoint GP1100x and likely many more ONTs and Modems.
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:80-99
- Filament brand:
PolyMaker
- Filament color:
Black
- Filament material:
PC-ABS
- Notes:
Print it with the front side facing down for maximum strength and no supports. You can print it flat with or without supports, but supports keep the screw holes more round. Use a brim for adhesion if using ABS. You can easily shave it off after while the material is still warm.
Post-Printing
I gave mine an Acetone vapor treatment as I wanted it to look very good in the production rack, but other than that there is no post-print work.
Tags
相关内容
联系我们
最新模型
-
F1赛船3D模型固定文件2024-05-08 -
冷却风扇导管（MK8挤出机）重制版2024-05-08 -
西斯热力炸弹墙挂架2024-05-08 -
基础火箭模型2024-05-08 -
RC球杆末端压缩机2024-05-06
最热下载
-
3D机器人手臂模型2023-03-26 -
3D模型：Easier Print LTT螺丝刀拉拔器2024-01-14 -
塑料扣（3D打印无需支撑设计）2024-05-08 -
厨房水槽滤网过滤器2025-06-05
