手机三脚架

Tripod Phone Mount

2024-03-22 06:42:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was a little sick of "printable" tripod phone mounts that are overly complex, and require metal hardware. So I designed one that only has 3 parts, and you just print double of 2 of them, for a total of 5 parts. The shaft is large enough to hold most tablets in landscape mode, so if it doesn't fit your phone, get something smaller... Tested on a Razer phone 2 (very thick and square), and an iphone 6s plus. (I'm aware the iphone is old. I just don't buy them, and it was someone else's old phone.)

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Resolution:
0.2 mm
Infill:
50-70% (If you want it to last)
Filament brand:
Overture
Filament color:
Matte white
Filament material:
PLA
Notes:
The tolerances are tight, but the material I use is so accurate, that it's still a little loose. Luckily, I planned for that, and it doesn't matter if your tolerances are too loose. Too tight might be a different issue, though.

I, personally, prefer to print the clamp and nut as one, so you don't have to use supports. It's a little messy, but less lost material. You do have to stick a knife, chisel, plaster knife, feeler gage, or something in there to get them to move, but I think it's worth it. Regardless, I included them separately if you prefer a cleaner print, less work, and don't mind the wasted material.