角度剪刀-Exacto剪刀专用M3调整版

Angle Cutter for Exacto Knife- M3 Resized

2024-03-23 02:23:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I really liked the original Angle Cutter by JaredTS486, but I only had M3 bolts on hand and trying to secure a nut inside the slot proved a pain. So I eliminated the slot for the hex nut and re-sized the hole to 3.0 mm so M3 bolts thread into the plastic itself. I also countersunk the hole since M3 40-50 mm bolts typically only have the first half of the bolt threaded.

I printed this on my prusa mk3 with a 0.6 mm nozzle. The tolerance worked perfect for me, with just enough bite so you can still thread it by hand and remaining in place, though different printers may require different tolerances for the hole. I've posted both stl and 3mf files for each angle.