Filament Drybox by Horst
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
"Yet another Drybox Thing"...
Spool Holder für Sunlu Rolls with iD 73mm.
I use 8mm stainless steel for the axis.
I used this Boxes: (German Link)
https://www.amazon.de/dp/B07L2QJ5LB?ref=ppx_yo2ov_dt_b_product_details&th=1
and this cheap Set of Fittings and PTFE Tube.
https://www.amazon.de/dp/B07R9JXQF4?psc=1&ref=ppx_yo2ov_dt_b_product_details
Per Box you will need
4x M4x6mm Screw,
1x 8mm Axis with 85-90mm length
and a half Cup of Silica.
If you want, you can put a hygrometer in.
btw, the closed Nut with M6 thread has the wrong thread (0,7 instead of 1,0). But screws on easy when its freshly printed.
Screwholes hight from bottom is 110mm,
The 6mm thread 55mm and the 10mm thread 185mm.
Print Settings
- Printer brand:
Tronxy
- Printer:
Tronxy X5SA/X5ST/Pro/2E/D01 Plus
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0,32
- Infill:20%
- Filament brand:
idk. it was 7 year old PET-G
- Filament color:
transparent, but do what ever u want
- Filament material:
idk. it was 7 year old PET-G
- Notes:
Maybe, for the Spool holder increase the flow by 5%. It is strong enough to hold the roll, but feels a little flimsy...
Tags
License
Filament Drybox by Horst
by Horst86 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
带摄像头和电池箱的Raspberry Pi箱2023-05-02 -
Dr. Dabber XS立体和工具架2023-05-09 -
奥古斯塔黄色锁一代适配器参数化模型2023-05-13 -
冲击RC微型顶点4英寸GoPro英雄支架2023-05-14 -
黑白色联邦太空陆战队员肩章 3D 模型2024-04-12
最热下载
-
可定制像素珠子照片面板2023-03-26 -
E3D火山喷嘴2023-05-26 -
完全可打印的无人机框架2023-05-31 -
Dado - 立方体模型2024-03-24 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
HGX lite v2支架2025-07-18 -
性感美女3d人像（带基座）2025-07-17 -
比基尼模型2025-07-16