HP Proliant DL380 G8 Noctua 60mm Fan Shroud - Premium

2024-03-24 00:02:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

HP Proliant DL380 G8 Noctua 60mm Fan Shroud - Premium

Summary

Summary
Very basic shroud that can hold 60mm Noctua (and many other) fans, into the mounting area for stock HP G8 server fans. While they fit well enough via friction, I used 3M mounting tape on the base of the fans to stop them from building up vibration noise, and then again on the top of the fan where the shroud meets it - same reason. They fit in snug, and help channel the air forwards and reduce loss of air pressure.

Print Settings
Printer:
CTC Dual

Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament brand:
Cheap knock-off stuff.

Filament color:
White

Filament material:
PLA

Notes:
Basic print, use whatever settings you feel happy with. 100% infill is certainly not required for this, but you could probably use anything from 5% up to 100% without issue.