可夹紧皮革缝制马装
Clampable Leather Stitching Pony
2024-03-25 02:02:21
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you need a stitching pony for leatherwork but already have a bench vice, this is a simpler alternative that takes advantage of your vice!
Just place your workpiece inside the plastic clamp, then place the clamp inside your bench vice and gently tighten.
Hardware Required
- 4” 3/8” Carriage Bolt - Make sure the head diameter is not larger than 22mm
- Matching nylon nut
- Thin leather padding for jaws (Optional)
- 12x2mm round magnets (Optional)
Assembly
- Slide the two printed pieces together
- Insert the bolt from the side with the square hold
- Tighten the nylon nut on just enough to provide a small amount of friction in the hinge
- Glue leather to the jaws for a softer surface
- Glue magnets into the holes on the side to hold your needles
Source Files
Designed in https://solvespace.com/index.pl
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK4
- Rafts:Yes
- Supports:No
- Filament brand:
Prusament
- Filament material:
PLA
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
沙箱建筑模型2024-05-08 -
定制曼达洛人头盔附带曲奇切割器2024-05-08 -
两件式灯具2024-05-06 -
汤马霍克 ASG32 4.44米 42毫米鼻部切割模板2024-05-06 -
飞机EGT模型2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Quansheng UVK6 桌面支架2024-01-10 -
FFBeast仿真飞行器模拟轮部件2024-04-19 -
Enders 3版控制面板2024-05-08
