夹紧支架，专为Nebula摄像头设计，用于Ender 3 V3 CoreXZ。

Clamp Mount for the Nebula Camera on the Ender 3 V3 CoreXZ

2024-04-29 10:05:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find a good camera mount for the Ender 3 V3 Core XZ that attaches to the frame of the printer (while some say they fit every ender 3 series models, they probably never tested it on the CoreXZ). This is possibly due to the limited space on the frame, with only one corner (2 sides) and the rails on the back of the frame instead of accessible in the front. I found liked the style of the KE mount and adapted it for the Core XZ. Since the XZ has a 2 sided corner frame with a hollow back where the rails slide, I deemed it necessary to turn this mount into a two sided clamp.

This includes both the mount and another piece to hold onto the other side of the frame, using a screw to connect the two pieces, and clamp down by tightening the screw. I also made the platform a bit slanted, for a better view of the print, and the platform is now curved on the corners to tightly fit the base of the camera. Though the mount platform slant is small enough and the curved edges of the platform fits the camera snugly that you don't seem to need a screw, I added a camera screw for those who want extra security on the mount to reduce the risk of the camera falling. Lastly, I added ridges to the clamps for extra security on the printer frame.

I significantly slimmed it down to make it lighter, use less filament and also limit any video obscurement from the camera platform itself. It clamps down onto the printer frame and has little hooks to secure it onto the edges of the each frame wall.

The shorter screw is for the camera and the long screw is to connect the two parts of the clamp. I would recommend screwing in the screws first directly to the camera and the base clamp (the part with the mount), respectively, without attaching any other part. Depending on the tuning of the printer (mine is just on the default settings), the first time it can be tough to screw in (I'm relatively new to printing and modeling, so maybe you know that already with printed screws in general), but I promise they fit!