多盒子型攀爬障碍物
MultiBox Fingerboard Obstacle
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my first attempt at making a fingerboard spot, I combined a lot of my favorite aspects of skating into one small piece. Any constructive criticism and tips are more than welcome. The ledge has been angled on one side to allow for wallies and other tricks. If the pegs do not properly fit, I recommend trimming them and reinserting with super glue for a stronger bond.
The hole beneath the rail can be filled with small weights like batteries to weigh down the obstacle for fingerboarding.
The rail will fit snugly into the main box without the need for super glue or other adhesive.
Pegs - (see italics)
Rail - Print on its side (I recommend a brim due to the long legs)
Ledge - Print on its side
Multi-Box Base - Print positioned upright
Quarter Pipe - Print positioned upright.
Tags
License
MultiBox Fingerboard Obstacle
by hry145 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
低多边形皮卡丘 - 多孔和双孔挤出版本2023-03-26 -
Quadlock到17毫米球（Garmin）适配器2023-05-03 -
业余无线电爱好者 - 线绕装置 / EFHW 统计装置2024-04-10 -
抽屉分隔盒，香料瓶收纳架2024-05-06 -
blink门铃钥匙2024-05-08
最热下载
-
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
红米手表4号充电基座2024-03-15 -
盐湖插入整理器2024-04-13 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
一体打印行星齿轮2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24