光线室V2

Light Chamber V2

2024-03-26 10:09:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a light chamber designed for chemometric analysis from mobile phone pictures. One of the mais challenges in gathering visual information from mobile cameras is the lighting conditions, which can be very variable from moment to moment, even in a "controled environment".
This chamber is a simple solution where LED strips are glued under the lids and a window can slide for any camera position in different mobile phone models. A side tray is used to insert several kinds of samples, from powders to grains and even whole fruits.
In the marked figure, it's possible to see the main body (A), the sliding window (B), the 2-part lid with angled supports for LED strips (C and D), the sample tray (E), one of the sample holders (F) and the powder compactor (G).
Other sample holders are available. The box has slots for two SR-32 rocker switches that can independently turn LED strips on and off, letting the user choose what is the best lighting configuration. Also the system can be powered by a small 12-volt power source, so there is a hole for a female connector as well.

Print Settings

Printer brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2 mm
Infill:
10-30 %
Filament brand:
Any
Filament color:
Black
Filament material:
PLA or PETG
Notes:
Supports are needed only for the switches and power suply connector holes. It's recommended to print in black, in order to avoid undesired reflections inside the chamber.