全尺寸星船拼图

Starship Tile - Full Scale

2024-03-27 10:52:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find any full-scale models of Starship's heat tiles, so I created one using photos found online and pieces that I own. It may not be perfect but should be very close. Slightly less heat resistant than the real thing, though.

Dimensions & Compatibility

Scale: 1:1 full-scale replica
Size: Approximately 12 inches (300mm) from point-to-point, 10.5 inches (266mm) from edge to edge
Printer Requirements: Due to its grand size, a full-scale single print may not be feasible on standard printers. However, scaling down the model unlocks a multitude of creative possibilities, including a set of unique, space-themed coasters.
Split Model: The split model should fit a 200mm x 200mm bed. 3 copies will need to be printed along with 6 pegs. The pegs are more-so there to help align the print while your choice of adhesive cures.
Tile Frame: This is a hollow model at the request of a friend. It can be used as a unique picture frame

Design & Texture

Surface Texture: For an authentic representation, avoid printing on a smooth bed unless you intend to paint the model. I also suggest using the ‘fuzzy skin’ finish on the outer walls to emulate the more rugged texture of the actual heat tiles used on SpaceX’s Starship.
Inspiration: The design is inspired by the hexagonal ceramic tile system of SpaceX’s Starship.