Fatshark 电池带式夹具

Fatshark Battery Belt Clip

2024-03-27 11:34:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Fatshark 电池带式夹具

Summary

Made a quick belt clip for the fatshark 18650 battery pack to free up some pocket space while flying. Not sure how much demand there still is for something like this, but I needed one so I'll share in case someone else is looking for the same thing.

I'll probably make one for the smaller fatshark lipo pack at some point, but I mostly use the 18650 pack so let me know if you're looking for that one.

Print in PLA, PETG, etc. TPU is too soft. It clips onto the battery fine without breaking and holds very tight.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament brand:
Overture
Filament material:
PLA

Tags

fatshark fatshark battery

License

CC BY-NC-SA

Fatshark Battery Belt Clip
by sstalder5 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Fatshark 电池带式夹具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

全能3D打印机测试
2023-03-26
GMX曲线支架支持GoPro安装（或轻型结构）
2023-05-22
E3D火山喷嘴
2023-05-26
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）
2024-01-11
Dado - 立方体模型
2024-03-24

最新模型