AppsByAaron谷物干燥滚筒3D模型

AppsByAaron Cereal Dryer Spool Roller

2024-03-28 23:40:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

None of the available prints for allowing a smooth roll of my filament spool within the cereal container worked for me so I made my own version. This includes my Dessicant Dryer Tower (without lid for now).

I used 50% cubic infill for the support rod becuase the bearing attatch to the ends and I wanted more strength there. All else was 15% infill.

Triangular supports (print 2) just pop into the base slots. No glue needed.

Optional base (base beta) are included in case you don't need all the extra base footprint.

Future updates:
-Holder for humidity/temp meter.

Cereal containers
https://www.amazon.com/dp/B08TWH2QHV?psc=1&ref=ppx_yo2ov_dt_b_product_details

Desiccant I use (but has not effect on the models here)
https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details

Bearings 608 (608ZZ ABEC-5)
https://www.amazon.com/dp/B07BWR69VN?psc=1&ref=ppx_yo2ov_dt_b_product_details

Marked as Work In Progress because I'm still not 100% happy with this and I'll make the lid for the desiccant tube. Will also look at 8mm dowl rod (wood or plastic) because the current roller rod takes an hour to print and that's too long IMHO for what it is.