树莓派NAS网络存储设备搭建指南

Raspberry Pi NAS

2024-03-30 05:21:43

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

This is my NAS project based on a Raspberry Pi running openmediavault.

As this project is too complex as to describe here in a few lines how to build this NAS, you will find a comprehensive Instructable here: https://www.instructables.com/Raspberry-Pi-NAS/

These were my design goals for the enclosure:

Cabling

Just only the power and network connectors should be accessible from the outside
Both connectors are on the rear side and next to each other
Avoid the 90 degree offset for power and network connectors which is typical for Raspberry Pi
The USB connectors and cables must be all inside the case for a clean design

Printing

There are only a few parts to print: the enclosure tray, device rack and side lid - optional: a stand
Quick and easy printability is secondary to design - supports are mandatory for the enclosure tray
A compact size which can be printed on a 200x200mm printer - no large format printer required
Durable connections - melt-in brass threaded inserts instead of printed threads or clips

Miscellaneous

Must be suitable for the Raspberry Pi model 4 and the new Pi 5
No active cooling for noise reduction (0dB noise emission with SSD) @idle: 55°C CPU / 40°C SSD
Meaningful multi-line display instead of simple status LEDs
The display brightness will be reduced at night
Cheap and easily available standard components