小巧可爱的携带盒

Tiny Whoop Carrying Case

2024-03-31 10:40:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Fits 65mm tiny whoops. Designed around the WebleedFPV Crown frame with a Mobula canopy. Also fits the meteor65 frame and will likely fit other similar frame/canopy combos. If it fits your build post it in the comments to help others. The battery holder is designed around the GNB 380mah packs but will probably hold the standard 300mah stick batteries as well. If not, let me know and I'll make a top for the 300mah packs since I know that's what most people use. There's also plenty of room to carry loose packs with the plain lid too.

Requires 2x 5/16" x 5/64" (8mm x 2mm) magnets for the closure (harbor freight if you're in the US) and 45mm of 1/16" (2.40mm) od aluminum tube or similar for the hinge pin. I left a tiny bit of room so that the case doesn't squeeze the frame and warp it, so glue a small piece of soft foam into the middle of the lid to take up the slack if a slight rattle bothers you.