狐狸实验中的秘密令牌

The Fox Experiment Supply Token

2024-03-31 11:37:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Deluxe Edition of The Fox Experiment came will all plastic components, except for the Supply Tokens, which were provided as 2mm cardboard punchouts. This thing is a 4mm thick Supply Token blank, with the gear symbol sunken 0.6mm into one face.

Ideally, the bottom 3.4mm of the token would be printed in white filament, and the top 0.6mm would be printed in black filament (I only had grey on me at the time so I had to hand paint it).

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%

Post-Printing

Adding the SUpply Token graphics

The graphics for the flat face of each supply token (you will need 24) are provided by the manufacturer, as many people ended up throwing all of their cardboard out, assuming that all pieces were upgraded to plastic. I ended up printing this page, cutting out each token, and gluing it to the flat face of the token (with 2 coats of varnish over top to protect it): https://boardgamegeek.com/filepage/271861/supply-tiles