本10 R.A.T. 改版

BEN 10 R.A.T. Omnitrix Remix

2024-04-07 00:33:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed this Omnitrix model to come together using magnets. Be sure to measure your wrist and scale the model accordingly. I suggest measuring the largest part of your wrist that will come into contact with the Omnitrix otherwise the halves will pop apart when bending your wrist.

I also made a version to be able to magnet the core but didn't have a ton of success with that, so I just glued the outer ring but made it where the green middle section still spins.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%
Filament brand:
Inland
Filament color:
Silver
Filament material:
PLA+

Post-Printing

Remove the supports and clean up any of the left over support material inside the cuff. Glue in the magnets ensuring the polarity is correct for each magnet. Then paint to match the colors from the show and put on your new Omnitrix.

How I Designed This

I also made a version to be able to magnet the core but didn't have a ton of success with that, so I just glued the outer ring but made it where the green middle section still spins.