超级高性能无线控制汽车冲击塔MJX玩具部件

Hyper Go RC Car Shocks Tower MJX Buggy Part

2024-04-01 08:28:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

ASA is a PITA to print. I ended up preheating the bed at 100 and then printed pretty hot (100-105 bed temp then 270 for first layers then 250 thereafter). Still had some adhesion issues but it worked. Still dialing in my ASA printing. I think PETG would work too and might be easier to print. Works pretty darn well if I do say so myself. the shock-attachment hole is a tad small but if you use some force it'll go. Didn't want to skimp on material there since there's no nut (it threads into the plastic). I also increased the number of wall layers to 10 to give the holes a bit more material (may not have been necessary since I ended up doing 100% infill).

I printed it with the forward facing part (when it's on the RC Car) facing up, and used a raft, and used supports on the build plate only.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
Yes
Supports:
Yes
Resolution:
.2
Infill:
100
Filament brand:
Elegoo
Filament color:
Black
Filament material:
ASA
Notes:
ASA is a PITA to print. I ended up preheating the bed at 100 and then printed pretty hot (100-105 bed temp then 270 for first layers then 250 thereafter). Still had some adhesion issues but it worked. Still dialing in my ASA printing. I think PETG would work too and might be easier to print. Works pretty darn well if I do say so myself. the shock-attachment hole is a tad small but if you use some force it'll go. Didn't want to skimp on material there since there's no nut (it threads into the plastic). I also increased the number of wall layers to 10 to give the holes a bit more material (may not have been necessary since I ended up doing 100% infill).

I printed it with the forward facing part (when it's on the RC Car) facing up, and used a raft, and used supports on the build plate only.