K1 MAX 车顶升起器带滑动玻璃顶盖

K1 MAX lid riser with sliding glass top

2024-04-03 20:51:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is my version of riser. I've been using it for several months now.
I usually print using PETG. I didn't want to have a completely closed chamber, but I also didn't want it to be too noisy.
In my experience, for PETG it is enough to open the side shutters.
Because I wanted my riser not to introduce/produce additional vibrations, around the upper edge there is room for a top seal with a thickness of 2 - 3 mm

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
doesn't matter
Infill:
doesn't matter
Filament brand:
doesn't matter
Filament color:
doesn't matter
Filament material:
doesn't matter
Notes:
I printed the side walls vertically with support only at the bottom. The front and rear walls can also be printed flat, also with a support.
The rest don't need support

"Aperture" must be printed twice, "mounting-R" and "mounting-L" singly, and "mounting" and "pin" four times.

You also need sixteen pieces of thermal inserts.
Because I wanted my riser not to introduce/produce additional vibrations, around the upper edge there is room for a top seal with a thickness of 2 - 3 mm