Artillery X3 后部装载螺旋管指南
Artillery X3 filiment guide for rear mounted spools
2024-04-04 04:08:10
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I wanted to have my spool behind my printer so I made this, you'll need the wheel, washer, and clip from the original as I have not made my own yet...
I Put Artillery On it as though it was a nice touch
Artillery printers don't have many upgrades so I thought I'd upload my edit, it might help someone out.
This isn't perfect as I made it from scratch using the original as a guide, it works and prints clean just getting it on and off is a struggle
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X3 Plus
- Rafts:No
- Supports:Yes
- Resolution:0.2mm
- Infill:20%
- Filament brand:
PrimaSelect
- Filament color:
Silver
- Filament material:
PLA
- Notes:
Needs custom supports added,
its not 100% yet needs some adjusting, It is a bit tight getting onto the printer
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
双重技术差分3D模型2024-01-13 -
DF64E 清洁刷持有器2024-01-14 -
藏身载具：VKB战斗者装备2024-03-18 -
MX-1000三脚架快速释放装置2024-04-09 -
Ender-3电源下部支架2024-04-22
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
拒绝的手势2024-04-19 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
螺旋锥形手玩具（全新）2024-05-08
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
兔女郎半身像2025-07-15