水槽尾部螺丝与5/8英寸管道适配器

Sink Tailpiece Screw & 5/8 Hose Adapter

2024-04-07 07:01:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm doing a Sprinter van conversion and ran out of room under the sink. A standard tailpiece was too long - I couldn't remove my gray water jug. These parts solve my problem by reducing the minimum depth and decreasing the part count.

The "Cap Tight" is to spec and works really well on my Bambu X1. My old printer would have needed the "Cap Loose" version (with the threads backed off 0.01 inch) to make it screw on.

The drain-to-hose adapters fit in a 5/8 inch ID hose (3/4 hose, generally). One is 45 degrees to help with the tight clearance. The other is 60 degrees which helps a little more.

The 60 degree is also offset to help speed draining in the northern hemisphere (where drains swirl clockwise). If you're in the southern hemisphere, flip the pattern before slicing.