船只穿梭编织设计
Boat Shuttle Weaving
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
To hold a bobbin of weft during weaving.
Consists of two parts, the BODY and the ROD.
The ROD slides completely in and out of the BODY, to hold and release the bobbin.
There is a slat of wood adhered to the bottom of the BODY in the images, though this should not be nessecary for function.
The rod has diameter 4mm
The bay has length 148mm and width 34mm
The yarn slit has width of 5mm
The ROD is a cylinder with ends cut to match the BODY where they exit, and a segment cut from the bottom to print on.
Print Settings
- Rafts:No
- Supports:No
- Resolution:I did 0.3, consider friction against worp
- Infill:3 walls, low lightning infill for BODY; solid for ROD
- Filament brand:
P.L.A.
- Filament material:
P.L.A.
- Notes:
The yarn slit is a long bridge. I do not reccommend using support, even though this bridge will sag, as the bridge should be laterally smooth. If you do use support for the bridge, make sure that there is no support in the rod-hole, and that the slit is smooth after.
Custom Section
If you would like modification, clarification etc., or just to share how it went, please comment and let me know!
Custom Section
If you would like modification, clarification etc., or just to share how it went, please comment and let me know!
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
2023年度EDC手镯饰品2023-05-10 -
藏身载具：VKB战斗者装备2024-03-18 -
特斯拉Model Y（及Model 3？）座椅轨道末端盖2024-03-19 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
HWS用参数化偏移钥匙孔钩2024-04-13
最热下载
-
Valorant 杰特的姿态2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
系带3D凉鞋（儿童款）2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
兔女郎半身像2025-07-15 -
私密羞羞娱乐骰子2025-07-15 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15