工作室铅笔夹壁挂式架

Workshop Pencil Holder Wall Mount

2024-04-07 22:50:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Why, hello there!

Say hello to my little friend. This charming little fellow is my workshop pencil/pen holder. It holds 18 devices, the cradle cylinders are 70mm (just under 3") and 15mm (about 5/8") wide. They will hold marker- and pen-type sharpies, as well as carpenter pencils and the like.

It can be wall-mounted and sticks off at a 20 degree angle , more or less, from dead-level. It can also be mounted vertically and it'd be 20 degrees off of dead vertical.

I printed it with the "back plate" flat to the bed, with 3 walls, 3 layers top and bottom, 4% gyroid infill, combination infill layers, 0.32 layer height and 0.3 first layer, on my Kobra Neo. It took 8hr50 to print, and cost 120g of filament.

It's a lovely gadget that keeps my favorite writing utensils close at hand. No fumbling for shit, no rooting through bins or bottles, and I always know when one is missing. I keep my mechanical carpenters pencils on the first row, carpenter pencil lead refills on the next one up, then felt tip sharpie pens, and felt tip sharpie markers.

Super handy, hope you like it!

Take, remix, use, download, distribute, sell, I don't really care. I just want to share and give back to the community that's given me so much. Check out my other stuff for more workshop goodies!