丝料干燥机/丝料盒滚筒指南

Filament Dryer/Filament Box Roller Guide

2024-04-11 09:41:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Roller Guide to be used on a Filament Dryer Box to reduce the drag as the filament is fed out of the box and into the Buffer/MMU2/printer. I use them from above to help with feeding my MMU2. They dramatically reduce the drag when exiting the Filament Dryer. I used 608zz Bearings that simply press into the Wheel then snap into the roller frame. You may have to scale up or down slightly depending on your printer and setup. I have a couple different Filament Dryers, Sunlu, Jayo, CCTree so I included 2 different Models to accommodate. (I apologize for poor photo quality but I'm sure you get the idea)