组装式眼镜笔筒收纳盒

Assembled case for glasses, pens and more

2024-04-12 05:34:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Assembled case for glasses, pens and more. Initially it was supposed to be a case for glasses, but after printing the first sample, the idea arose to make it compact. So that when the case is not in use, it takes up little space and is convenient to store.

The case is printed in one piece, the gap between the moving parts is 0.25mm, so if your flow or table level is poorly calibrated, the parts may melt...

I made several options with different widths, the width is indicated on the model, this value when folded, on the table the parts will take up 60mm more.

You can also increase the details, I did 130%, and at these values it is already harder to snap the clamp.

I used PETG because it is more elastic.
Layer height - 0.2-0.24mm
Filling - 10%
Print without supports