熟悉的场景与人物

Familiar Places Figures

2024-04-12 08:08:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Playskool Familiar Places

McDonald's figures

Recreation of the Playskool Familiar Places McDonald's place set figures. These were modeled off vintage figures and have been enlarged by 400% making each around 240mm (9 1/2") tall.

The originals came in two colors one with a red hat and one with a blue. The pieces have been oriented in the best printing arrangement. You will need to add supports to the following places:

Inside of the body
Front of body overhangs
Inside the head post slot
Front of the face overhangs
Bottom of the hat

All pieces you will need one copy of except the McDButton which you will need to print three copies of.

The insert pieces on the body and face should just fit in the recesses on the body with friction but I suggest putting just a dab of super glue in the recesses before inserting the pieces. The head and hat go together with a square post and square post hole. These have been made a loose fit on purpose so you can either glue them or leave them unglued to mix and match pieces.

More figures in this line are coming in the future.

Thanks and happy printing!