科罗拉多窄轨短拱车模型

Colorado Narrow Gauge Short Caboose

2024-04-14 17:46:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A model of the iconic narrow gauge short caboose, usually seen on Colorado and New Mexico scenic lines. Based largely on #400, #578, #575, #574, and whatever other similar photos I found online. I've included a full model for those feeling adventurous or printing in smaller scales and individual pieces for the rest of us who'd rather build it like a kit (which is what I have done.) The caboose is modeled at 1:20.3 (F scale) and intended to run on 45mm gauge track with my caboose trucks.

Interior will be uploaded seperately.

I just realized that I never made a model of the steps, because it's so thin I didn't want to print it. If there's desire I can whip that up but I really recommend doing them from brass when you create the grabs and railings.

Print Settings

Printer:
Dbot 300x300
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament brand:
Sunlu
Filament color:
Grey
Filament material:
PLA, PETG, ABS
Notes:
I typically print the half frame with the deck in place, but the bolster and needle beam separate. If you print the separate half-frame part you can install a wood plank floor for better realism. They can all be printed at once if you aren't worried about the bridging on those beams, it's not like anyone can see it. Print ends , doors, and windows twice.

Smoke stack is a remodel of https://www.thingiverse.com/thing:5474868