飞行鱼V3/V3.5 - 极简滑动电机防护罩
FlyFish V3/3.5 - Minimal skid with motor guard
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of the OEM Flyfish arm skids. I fly a lot on concrete and in woods resulting in a lot of motor strikes.
This is my second iteration which adds a "horn" in front of the motor for a bit of additional protection without too much weight added. (The original version was only good for 1404 motors).
This works well on my 1505's but should be good up to 16XX... maybe more.
Print Settings
- Printer brand:
FlashForge
- Printer:
Adventurer 5M
- Rafts:No
- Supports:Yes
- Resolution:0.15
- Infill:100
- Filament brand:
FlashForge
- Filament color:
WHITE
- Filament material:
TPU95
- Notes:
I use FlashPrint and set supports to post (not tree) for best results.
Brim set to 3mm and 0.5 margin to the print for easy removal.
Allow "support on build" to ensure the arm recess is supported. Also ensure you remove all the support from inside so the skid fits flush on the drones arm.
Post-Printing
Tags
License
FlyFish V3/3.5 - Minimal skid with motor guard
by OhBee086 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
全能3D打印机测试2023-03-26 -
面板视图19英寸立架模型2024-03-14 -
osVAC新型法兰饼夹具（M25）2024-03-17 -
命运博士头盔2024-03-25
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win3 把手型号2023-04-07 -
智能骰子滚动器2024-01-06 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
龙珠孙悟空，无需支撑2025-07-19 -
弹弓HGX-FRAME V1A2025-07-18 -
比基尼模型2025-07-16