Ender 3 V3清废桶+刷子架

Ender 3 V3 Se Purge Bucket + Brush Holder

2024-04-17 10:51:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

We ender 3 v3 se users have some problems in common, a couple of those problem's being that it is almost impossible to remove the purge line that your printer made, and that the nozzle has to be cleaned regularly. This 3D model fixes both of those problems by having a purge bucket, and a brush holder. Not all parts are printed, such as a longer bolt that I found lying around matching my beds threads. And of course a nut as well. All the brush holders that I used in the past have had 1 problem in common, they where all very flimsy and not robust. I fixed that by making the walls and overall body of this model thicker. And also adding a leg that rests on the printers frame.

I don't recommend copying and pasting the gcode that I'm using. It might have to be a little different because its different for everyone.

M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
M420 S1; Enable mesh leveling
G92 E0 ;Reset Extruder
G1 Z1.0 F3000 ;Move Z Axis up
G1 X77 Y-12 Z0.2 F5000.0 ;Move to start position
M109 S[material_print_temperature_layer_0]
G1 F500.0 E25 ; Extrude into bucket
G92 E0 ;Reset Extruder
G1 X54 Y-12 Z4.2 F1500 ;Start position of brush
G1 X24 Y-12 Z4.2 F1500 ;Wipe 1
G1 X54 Y-12 Z4.2 F1500 ;wipe 2
G1 X24 Y-12 Z4.2 F1500 ;Wipe 3
G1 X54 Y-12 Z4.2 F1500 ;wipe 4
G1 X24 Y-12 Z4.2 F1500 ;Wipe 5
G1 X54 Y-12 Z4.2 F1500 ;wipe 6
G1 X1 F1000 ; Raise a bit