芭比挂衣钩
Barbie clothes hanger
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a clothes hanger for Barbie. I designed it by measuring the original one. You can see a comparison of the original and the printed one in the photos.
For the logo I used https://www.thingiverse.com/thing:1152706
It has to be printed in two parts in order to avoid using supports, and with a high resolution to preserve the details.
It can be assembled with toothpicks and / or glue.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Resolution:0,12
- Infill:100%
- Filament brand:
Creality
- Filament color:
Pink
- Filament material:
PLA
- Notes:
To get the logo detail a 0.2mm nozzle is required. With 0.12mm layer height takes about 45 minutes to print both sides of one hanger. To assemble use pieces of toothpicks or any other 2mm rod in the three holes. If the toothpicks have a snug fit, it will hold good enough, but if needed you can use a drop of CA glue as well.
Tags
芭比挂衣钩相关内容
联系我们
热门推荐
-
伊马克利普（字符串乐器静音处理）2023-06-12 -
Mx5 Mk3 (NC) 风挡盖罩子附件带logo2023-07-25 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
Mobula 6盒3D模型2024-01-17 -
代莫斯面罩——来自彩虹六号：围城2024-05-04
最热下载
-
Valorant 杰特的姿态2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
拒绝的手势2024-04-19 -
沙箱建筑模型2024-05-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24