键盘发呆

Keyboard Fidget

2024-04-20 03:38:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I used wisteria epomaker mx switches. As I was going for simplicity I used premade keys, but any key made for an mx style switch shout work. once printed depending on how good your printer is you may have to fit the cover a bit. My printer is a bit worn out so I have to do some clean up for proper cover fit. The Wisteria keys require no modification with the cover on there. once it fits you can super glue it or use what ever glue you like. A small eye hook and key ring and then its good to go on your keys for on the go clicking. I have printed these is both abs and pla in low and high layer heights. All printed with out issues and fit the keys as expected.