钉头切割工具

Pin Header cutting tool

2024-04-20 08:34:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed a tool to cut pin headers, so I designed this thing.

It does what it says it does and nothing else, well actually it can cut your fingers as well, so be careful with it.

it can evenly cut up to 5 40-pin headers in one go into any combination you require.

1 40-way pin header can be cut easily by probably anybody, 2 will require a bit more strength, 3 will probably require you to hire Arnold Schwarzenegger, 4 could be done with a press, and 5 can be done with a press operated by Arnold Schwarzenegger.

I've posted this as I want to see what others can do with it to make it easier to operate, esp with the cost of hiring Arnold Schwarzenegger for an afternoon.

you will require the following Items

2 x 8mm linear rods. 1 needs to be 120mm long, the other as long as you like, and possibly another 2 for cross bars to strengthen the device to enable Arnie to use it.

6 x 8mm 22mm 7mm roller skate bearings

2 x M3 120mm double-ended steel threaded rods

4 M3 nuts

A Bunch of Stanley 99E Blades, use the printable blades in the blank spaces, they are cut down from mckooldude. you need those so that you don't deform the device when you tighten the 120mm studs.