增强版蒙圣米谢尔模型

Enhanced Mont St Michel

2024-04-23 01:02:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After painting a 50% model and badly printing a 70%model, I was frustrated with the amount of inaccuracies in the model. I decided it needed improving, so I compared maps and satellite views and a nice 3D model on Sketchfab. I found and made 15+ enhancements in Blender. See the photos and/or the differences list.

I also sliced the model at 0.16 instead of 0.20, which made a nice difference, and printed at much slower speed to improve accuracy on some of the small details. The final print took 30 and a half hours, but was well worth it.

There was still one pile of rocks that I thought I fixed by the island entrance, but accidentally left a small hole in it so it printed wonky. I fixed it in the model, but cannot be sure until making another full-sized print (actually 70% is as big as my printer will fit). I need more filament for this big a print.

Note, I am selling hand painted 3D prints of Mont St Michel on my Etsy store (https://ABitMoreAdventure.etsy.com/listing/1714400077). Currently I have the original models painted, but as I sell out, I will be replacing them with these new versions. If you want to buy a new version, put it in the special requests field on the order and I'll make you one. I sell 25% and 50% so far, but will hopefully add the 70% size soon (I plan to keep this prototype for myself though).

Many Enhancements to Original Model. See pictures.

Added Barbican to Abbey Entrance, added Fountain of St Aubert to North side, added courtyards: next to Cloister and next to Barracks, added Bridge over Grand Stair, added Tower next to that Bridge, added roofs to several buildings and towers, added a tiny moat and drawbridge at King's Gate. Fixed various bad geometries for printing.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
.16
Infill:
15%
Filament brand:
Generic
Filament color:
Grey
Filament material:
PLA+
Notes:
Printed slow, 30.5 hours and got excellent detail at 70% size. Modifications showed up also at 25% size.