3D原地打印多面镜环奇观

Print-in-Place Kaleidocycle

2023-03-26 20:32:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And it prints without supports as well.

The models shown in the photos were printed in PLA. Print at 0.2mm layer resolution or better (the blue one is printed at 0.3mm layer resolution and it doesn't move smoothly). The purple and white are 0.2mm prints and the pink one is a 0.1mm print--the three of them work perfectly well.

I have uploaded two versions of the thing. If in doubt or in a hurry, print the "PrintInPlace_Kaleydocycle.STL" at 0.2mm layer resolution in PLA and you'll be happy.

You can use the "tight" STL version if you have a good printer (*); your resulting kaleidocycle will have slightly better mechanical properties. The only difference between this "tight" model and the other one is that the slack between the moving parts is smaller, and as a consequence it wobbles less and twists better.

The pink kaleidocycle in the photos is the "tight" version. The purple and blue are the standard version and the white is halfway between.

You can see a video of the kaleidocycle in action here

Enjoy!

(*) if you want/need to know if you have a good printer, print the tight model and if the moving parts don't fuse together, then you have a good printer.

3D原地打印多面镜环奇观

朋友，你觉得上面这个模型，属于下面的哪个分类？