PZEM-004t DIN导轨安装模块
PZEM-004t DIN-rail mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This case is for PZEM-004t and MH-ET D1 mini ESP32 (https://aliexpress.com/item/32836372640.html?sku_id=12000029299984823).
I plan to use this device not only as electricity measurement unit, but as controll unit to.
So I add a small but nice visible 0.96 OLED display (like this one - https://aliexpress.com/item/32896971385.html?sku_id=12000037069025270), encoder and KF301 screw terminals to connect external DS18b20 thermometrs and SSR to turn on/off load.
To power electronics I use HLK-PM01 power supply unit (https://aliexpress.com/item/1005003290458743.html?sku_id=12000025045265016).
You may need to use supports to well print display window.
Good luck!
Thanks to Mark McKillen (https://www.thingiverse.com/btechsol) for base model!
And I used Rotary Encoder Cap - EC11 by likwid sage (https://www.thingiverse.com/likwidsage)
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:100
