自定义自行车灯架设计

Customizable Bike Light Mount

2024-04-24 04:58:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This design was used to mount a rear bicycle light to the back of my bike, remixed from drxenocide's version.

It is designed so that the light pressure fits/slides vertically into the slot. The mount has recesses and holes for zip ties (of customizable width) which attach the mount to the back of the rack (or whatever vertical flat surface you are mounting it to).

The included STL was the one that worked for my Concord 24014 Rechargeable USB Rear Tail Light (https://www.walmart.com/ip/Concord-5-Lumens-USB-Rechargeable-Bicycle-Tail-Light-2-oz/1614592554), but this thing should be customizable to any of the slide-lock cycling couplers.

Put any other requested features in the parent (drxenocide) thing

Print Settings

Rafts:
No
Supports:
Either use a pocket knife to hold up the latch clip as it prints, or use a separate support, or include printed supports.
Resolution:
Fast/Low is fine
Infill:
15% was fine
Notes:

Print with the slide hole on top/up so that you can print without supports/overhang errors.

While the top of the ziptie recess fits a ziptie of that size exactly, the bottom recess gets a little squished, so either add 1mm to the ziptie width as tolerance, or just do a little post processing with a file or knife.