RG8Z线缆的剥线指南——使用Amphenol PL-259连接器
Strip guide for RG8Z using Amphenol PL-259 connector
2024-04-29 02:48:41
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
RG8X stripping guide for Amphenol PL-259 connector.
Dimensions taken from https://static.dxengineering.com/global/images/chartsguides/d/dxe-ccspecs-info_rev1.pdf
With coax butted against each stop, strip at left edge of card, from bottom up.
You might need to adjust locations of stops, if your printer X is off.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Doesn't Matter
- Supports:No
- Infill:15%
- Filament brand:
Inland
- Filament color:
Gray
- Filament material:
PLA
- Notes:
Should print fine with no raft or skirt. You might need adhesion helper, depending on your print surface, so avoid corner lifting.
Tags
License
CC BY-NC-SA
Strip guide for RG8Z using Amphenol PL-259 connector
by jetsam62 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
WALL-E机器人 - 全部3D打印2023-03-26
-
40×0型风扇安装件(适用于E3DV6型号散热片,中心对齐)2023-05-28
-
Altima 2015车载音响遮盖面2023-06-26
-
仿真枪模拟消光器(变形版)2024-04-15
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15
-
Quansheng UVK6 桌面支架2024-01-10
-
螺旋锥形手玩具(全新)2024-05-08
-
Enders 3版控制面板2024-05-08
最新模型
-
弹弓HGX-FRAME V1A2025-07-18
-
玛莉德2024-05-08
-
熊王2024-05-08
-
芯片夹2024-05-08
-
2015年F-150中控台组织架构,带折叠中间座椅2024-05-06