模拟赛车踏板——油门与刹车
Sim Racing Pedal - Accelerator & Brake
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a Sim Racing pedal that I've created for a racing sim that I'm building. PLA is the main material used and you could also use PETG. Mostly a layer height of 0.25mm has been used. There is a separate clutch pedal setup with a few changes.
Fasteners used for the baseplates and connections are M8 - 65mm nut and bolts and for the links M8 - 50mm ones.
There are small connectors that are 3d printed as 2 parts. This could be replaced by M5 screw and nuts.
I have a youtube video of this setup, kindly watch it for further info.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:0.25
- Filament brand:
Orange
- Filament material:
PLA
Tags
License
Sim Racing Pedal - Accelerator & Brake
byThe_Custom_Sideis licensed under theCreative Commons - Attributionlicense.
相关内容
联系我们
热门推荐
-
速贝Flex 25摄像头微型支架和GoPro支架2023-03-26 -
Cessna 172三维模型2023-03-26 -
DIY版画压片机 - 开源版画工作坊2023-03-26 -
GepRc Mark4 HD5 O3 准备包2023-06-15 -
线框无心2024-05-08
最热下载
-
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
HGX lite v2支架2025-07-18
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
弹弓HGX-FRAME V1A2025-07-18 -
高跟鞋鞋架2025-07-17 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24