格栅系列空气喷气工具组织盒

Gridfinity Air Duster Organizer

2024-05-01 12:48:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a gridfinity-compatible air duster organizer I made to hold my cheap electronic keyboard duster and all of its accessories. Mine is OTAO brand, but from my understanding, it will be compatible with a lot of the cheap Amazon/ Ali Express air dusters.

The images are of version 0.5, but I recommend version 1.0

Version 0.5 has a very tight fit on the device itself, has an overly complicated vacuum relief hole which won't look pretty when printed (though it still works), and one of the attachment holes is too big (I had assumed its size matched the other large attachment, which it doesn't)

Version 1.0 has not been printed yet, but I gave the main device slot +0.2 mm of clearance, bored out the vacuum relief, and decreased the size of the aforementioned accessory slot, which will hopefully make it a tight fit. I will be printing this version very soon and verifying that the issues have been fixed, and if not, fixing them.

If you have any suggestions please let me know. I'm pretty knew to 3D modeling and 3D printing, so there might be things I have yet to consider here.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15
Filament brand:
COMGROW
Filament color:
Black
Filament material:
PLA
Notes:
Print at your default gridfinity settings / settings for the filament you're using. It doesn't need supports or anything too special.