3dsjs

发射棋子压榨工具与轴承去除装置

Fidget Spinner Press and bearing remover

2023-03-26 21:53:32

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

UPDATE 17DEC2017: 我添加了一个更大的框架,'Spinner Press XL'。这有助于容纳较大的转盘,但我也发现它在其他用途上非常实用。此外,我将大螺丝的螺距调整了,现在提供了更多机械优势,并且转动起来更加容易。我移除了所有旧设计,以清理下载内容。

I designed this to make it easier to press fit the bearings in to fidget spinners. It presses them in to be perfectly flush.

This works for pressing large ball bearings in to place as well. I tested it with 1/2" ball bearings. You can also use it to remove those bearings.

To use, hand press the bearing in to the spinner a little and then insert in to the press and turn the screw until it's flush. I have found it easier to insert the bearing from the top side of the printed spinner as the bottom tends to flare out a bit on the first layer of printing.

I over engineered this a bit as I wanted to ensure that I wouldn't break it. It's thicker because I didn't want it to bow or bend and I added material around the screw to prevent stripping of the threads.

1 x 608 bearing for main screw
n1 x 5mm ID / 10mm OD / 4mm High bearing for removal screw

发射棋子压榨工具与轴承去除装置
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15