S712P 锂离子 18650 电池箱
S712P LiIon 18650 Batterie Case Koffer
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanHello people,
nhere is a small project with 18650 batteries. A battery with 7x12 cells from old laptops. So this combination has almost 0.5kWh of energy in my case. I can draw about 20 amps at 26 volts. I use it to charge my small solar storage at night, where during the day I can charge the battery pack in my truck for free. Used a simple BMS, which is fetched with in the battery trays. As connector plugs Anderson plugs were installed here.
Greetings ... Riko (Hamburg)
Hallo Leute,
nhier mal ein kleines Projekt mit 18650-Akkus. Eine Batterie mit 7x12 Zellen aus alten Laptops. Damit hat diese Kombination in meinem Fall fast 0,5kWh Energie. Ich kann ca 20 Ampere bei 26 Volt entnehmen. Ich lade damit nachts meinen kleinen Solarspeicher, wobei ich tagsüber das Akkupack in meinem LKW umsonst laden kann. Verwendet wurde ein einfaches BMS, welches mit in den Batterieschalen geholten wird. Als Anschlussstecker wurden hier Anderson-Stecker verbaut.
Grüsse ... Riko (Hamburg)
S712P 锂离子 18650 电池箱猜你喜欢
联系我们
最新模型
-
海豚鱼饼干模具2024-05-08
-
Tomy赛车驾驶舱部件2024-05-08
-
佩伦038 钥匙扣挂件(钥匙环)2024-05-08
-
柔软安全的大型模型箭头部2024-05-08
-
Fender Piping(凯德)2024-05-06
最热下载
-
东方风格机械关节龙3D模型2023-03-26
-
3D模型:Easier Print LTT螺丝刀拉拔器2024-01-14
-
红米手表4号充电基座2024-03-15
-
3D模型标题1:kp3s orca slicer2024-04-07