麦格拉斯视频喉咙镜头刀片

McGrath Video Laryngoscope Blades

2023-05-10 07:32:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are prototype 3d printable blades for the McGrath Video Laryngoscope. They have not been tested yet, so it's highly likely the design will be modified. This is designed with close tolerances so its friction fit onto the McGrath. The light and camera are exposed, potentially will develop a slot for a clear plastic insert on a future iteration.

Please read the following disclaimer carefully before using the 3D printable video laryngoscope blade design shared for open source use.

No Warranty or Liability: The creator of this 3D printable video laryngoscope blade design (hereinafter referred to as the "Creator") provides the design "as is" without any warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The Creator shall not be held responsible or liable for any direct, indirect, incidental, consequential, or other damages arising out of or in connection with the use of this design or any resulting products, even if advised of the possibility of such damages.

Not FDA Approved: This 3D printable video laryngoscope blade design is not approved by the U.S. Food and Drug Administration (FDA) for use on humans. Users are solely responsible for ensuring compliance with applicable laws and regulations, and for obtaining any necessary approvals or certifications for the use of the design or any resulting products.

Use at Your Own Risk: Users assume full responsibility for any risks associated with the use of this 3D printable video laryngoscope blade design, including but not limited to, the risks associated with the manufacturing, assembly, and use of any resulting products. The Creator is not responsible for any injury, damage, or loss that may occur as a result of using this design or any resulting products.

Modification and Redistribution: This 3D printable video laryngoscope blade design is shared for open source use. You are free to modify, share, or redistribute the design, provided that you attribute the original creator and include this disclaimer.

By downloading or using the 3D printable video laryngoscope blade design, you acknowledge that you have read, understood, and agree to be bound by the terms of this disclaimer.

Print Settings

Printer:
Bambu P1P
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
At least 50% or more
Filament brand:
PolyMaker
Filament material:
PLA
Notes:
No supports needed, make sure your printer is calibrated, as the tolerances are pretty tight on this