植物架子/苔藓棍子

Plant Trellis/Moss Pole

2023-05-11 02:23:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This trellis is designed with holes small enough to be able to use moss or soil without it falling out.The slit in the center is for pressing the plant directly onto the soil/moss so it can grow straight up the middle while the side holes allow for ventilation. The front plant easily slides on/off, making it easier to repot plants on the future that may need to be re-staked.

I recommend tying the plant in place with string/ties until roots are established, then they can be removed.

EDIT 8/8/23: The design is now complete. I've made the bottom stakes removable for easier printing on smaller printers, added a connector piece to make the poles stackable. and made everything a bit thinner for faster printing.

EDIT 8/19/23: Added a shorter version for printing on smaller printers, such as the Ender 3.