Wifi控制 160mm风扇阀门

Wifi controlled 160mm fan valve

2023-05-21 21:04:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text appears to be a detailed guide on how to set up and control a 3D printed fan valve system using an ESP32 microcontroller, a web interface, and a smartphone app. The guide covers various aspects of the project, including: 1. Hardware setup: * Connecting the fan to the ESP32 board * Setting up the servo motor for the valve * Connecting the 5V power supply to the ESP32 board 2. Software setup: * Installing Arduino IDE and configuring it for ESP32 * Downloading and flashing the project code onto the ESP32 board 3. Web interface/app settings: * Setting up a web interface using PyWebIO * Running the script on a device connected to the network * Accessing the web interface through a browser on any device The guide also mentions that the project is open-source and can be modified according to individual needs. Some key points from the text include: * The ESP32 board listens for POST requests to control the fan and valve * The fan takes 20 seconds to shut down due to its speed reduction time * The servo motor's minimum and maximum angles (servomin and servoMax) can be adjusted if necessary * The web interface is a PyWebIO-based application that can be accessed through any browser on a device connected to the network Overall, this guide appears to provide a comprehensive setup and control system for a 3D printed fan valve system using an ESP32 microcontroller and a web interface.Wifi控制 160mm风扇阀门

朋友，你觉得上面这个模型，属于下面的哪个分类？