指挥官专业座椅

Commander Pro Seat

2023-06-27 17:34:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the master seat By rawnei done with my poor modeling skills in blender and tinkercad combined. It is meant to fit in the handle for the trolley pretty snugly so you really shouldn't need anything else to secure it down, it does make it so you have to take it off to use the trolley but I don't mind it. Basically follow the same directions as Rawnei's Master seat with the infill mesh of a different density to get more squish on top. I used 10% infill and 6% on top with gyroid infill on mine and it might be slightly too squishy. With harder TPU you may want to lower it to 8% and 5%. Also the model didnt quite come out how I wanted to so orient it the way I have it but you gotta sink it about a mm below the buildplate to get a nice flat first layer. ( I am not a 3d renderer). Other than that some tree supports for the insert part and follow Rawnei's guidelines for the fuzzy setting in cura, really makes it nice.

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
No
Supports:
Yes
Resolution:
.28
Infill:
.10 (see description)
Filament brand:
Inland
Filament color:
Orange
Filament material:
TPU 95A
Notes:
Use infill mesh to modify infill density for the top portion of the seat.