电脑音箱支架

Computer Speaker Stand

2023-07-25 01:04:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Computer Speaker Stand designed for 5 inch speakers. Raises speakers about 8 inches to bring tweeters to ear level. Three files are included (base, top, and post). The post will need to be printed four times. I've also included a mesh of the entire base for visual inspection. I don't believe the full base is printable. This design is an attempt to decouple the speaker from the desk by crossing the posts diagonally (YMMV). I'm also using 4% fill and pause the printer just before the top layers to (very carefully) fill the base with fine sand.

The gaps between the posts and mounting holes are 0.4mm. This is to allow enough flexibility to flex the posts inward, allowing them to fit in the holes. If gluing the stands together, I recommend not applying glue until the stand is fully assembled.