CR Touch智能连接器（EVA 3.0系统支持，Rapido UHF技术）
CR Touch connector for EVA 3.0 with Rapido UHF
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I use a CR Touch rather than a BL Touch and the EVA 3.0 BL Touch is no longer compatible. I couldn't find a CR Touch connector for EVA 3.0 that was sensible/worked so I've made this one.
This one fits easily where the standard EVA 3.0 BL Touch should go and is designed to be the right size for someone using A Rapido UHF hot-end (this will also work for someone wanting to use a Volcano hot-end).
This prints without rafts/supports/anything fancy and should take about 30 minutes to print.
I'm printing at 240C with a bed temp of 80C.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10
- Rafts:No
- Supports:No
- Infill:40%
- Filament brand:
Generic
- Filament material:
PETG
- Notes:
Infill is probably too high.
Tags
License
CR Touch connector for EVA 3.0 with Rapido UHF
by emp3thy is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
伊兹米尔城市3D模型2023-03-26 -
Cup Holder for Game Table2024-03-14 -
Zojirushi 米饭煮锅露水收集装置2024-03-21 -
gba 游戏 任天趣 红蓝机 插入卡带2024-04-22 -
魔杖2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Apple鼠标 - M0100 3D模型2024-03-25 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
HGX lite v2支架2025-07-18 -
裸女站立2025-07-16 -
关节活动人，假人13,Dummy 132025-07-02 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24