SUBARU FORESTER 雾灯适配器安装包 09-13

Subaru Forester Fog Light Adapter 09-13

2023-08-07 03:11:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Relatively basic adapter to mount newer LED fog lamps to the factory locations in SH Foresters 09-13.

I used a pair of washers and a flange nut to act as a spacer between the back of the adapter and the vehicle side mount to set the correct angle on the light.

I wasn't paying attention and kept trying to mount the bezel in the wrong orientation, wound up just cutting the center out of my OEM hole covers which fit nicely. The bezels should fit when placed in the correct orientation though.

Print with a material that can handle heat

Hardware list for reference:

Fog light: https://www.amazon.com/dp/B01K39R4HE?ref=ppx_yo2ov_dt_b_product_details&th=1

*NOTE: I needed to swap the wire orientation on one side of the plug adapter below to get the polarity correct for these lights. This was very easy to do as one side of the plug is easily de-pinned with a small poker.

Plug Adapter: https://www.amazon.com/dp/B07PB15WJJ?psc=1&ref=ppx_yo2ov_dt_b_product_details

M6 U-nuts qty. 2

M6x18 or similar qty. 2

M6x30 qty. 2

M6 flange nuts qty. 4

M6 flat washers qty. 8