Bolt almost M16

2023-08-08 18:37:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have an old rotary clothesline, rescued from the bin and been misusing it upside-down as a stand for my antenna. It was already old when I found it. The part where the arm come together was clamped on to the center tube with handscrews. Probably there once were M16. Due to age and evaporation of the plastic, the thread has schrunk. Also the screw has become brittle, the crown already has broken off. I still can get M16 in but I need pliers to do that. The screw I got out has a pitch of 1.75 instead of 2mm.
This design is to replace that screw.

Although I've printed thread before I have not printed this design yet.
I am going to print it when I'm back in the office on a !UP Mini (1) as thats the easiest way.
Setting up the Ultimaker needs too much efford.

Print Settings

Printer brand:
Up
Printer:
Up Mini
Rafts:
Yes
Supports:
Yes
Resolution:
fine
Infill:
one below full
Filament brand:
no idear
Filament color:
Black
Filament material:
ABS
Notes:
It is the !UP mini, the first model.
The color of the print will be black as that is the color we have in stock.
That is also why I will print it in ABS

How I Designed This

I've used an old version of SolidWorks.

Files:
.EPRT can be viewed and measured with eDrawingsviewer (Free)
.JPG - picture of the drawing
.SLWDRW Solidworks drawing, can also be viewed with eDrawings
.SLDPRT SolidWorks part, can also be viewed with eDrawings
.STEP 3D exchange file, can be used for further development (FreeCAD)
.STL 3D file for 3D printer
2D.PDF PDF file of drawing
3D.PDF PDF file of part (3D file cannot be viewed in Ubuntu/Linux)