RC 游轮 / 渡轮维京之格拉斯（玩具）带基础改装

RC Cruise Ship / Ferry Viking Grace (toy) with basic modifications

2023-08-19 03:20:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Disclaimer! These are not an optimal modifications and would make a skilled designer cry.
Parts have been merged to utilize the larger build plate available on the CR-10 (30x30x40 cm).

Modifications:

Merged hull into two pices.
Added some cross beams to stabilze the parts.
On one of the stabilzer beams added a gap to mount a power switch.
Punched holes for all windows. The idea is to glue transparent plastic on the inside add lights inside the hull.
Added two larger windows to replicate the original.
Two versions available: one original and one with a bow thruster built in.
Increased thickness of hull ends to make glued area more rigid.
Added guidelines for when painting the hull.
Added embossed Viking Line logo.
Added embossed Grace (boat name) text.
Added support for rudder pole hole to make sure it's water tight when printing without using other supports.
Added exhaust pipe and logo placeholder on large funnel.
Added cross beams on superstructure to make it more rigid.
Merged some superstructure parts.
Removed removable superstructure parts. The entire superstructure should be removable instead. (I plan to share some alternatives for fixing the superstructure in place.)
Added raceway to superstructure front.
Created a radar pole.

I'm currently in the processes of assembling this and will post some pictures when available.

Print Settings

Printer brand:
Creality
Printer:
CR-10 Smart
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
20%
Filament brand:
Generic
Filament color:
Dark grey
Filament material:
PLA+
Notes:
First prints where started before I tuned the printer settings (first time using this printer, CR-10 smart with direct drive and Klipper without any specific Klipper settings). Therefore I can't realy tell if artifacts are from suboptimal printer settings or my half ass modifcations.