Ender 5 Pro Base
Ender 5 pro Base
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Made to lift the printer up and to put the boards in this area whilst doing a dual z mod to keep appearance clean. mine is in a lighted enclosure so I have included a with so the light can be turned on or off independently of the printer 2 of the 4 corners are the same I have included a sot in the base to use t nuts to attach the stock feet currently looking for a t bar to lock the bottom half of the base together but not yet certain if this will be needed. switch cut outs are for GSW-49 GB/GARDNER BENDER SWITCHES holes to mount the base to the printer are M5x___(have to size length yet)
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Supports:Yes
- Infill:30%
- Filament brand:
any
- Filament color:
any
- Filament material:
pla/any
- Notes:
using tree supports on mine print centers on flat side and corners upright
License
Ender 5 pro Base
by tim389 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
原子鱼导弹型号MG7-A2024-04-11 -
乔思博 NF-2和NF-1 DRAM/VRM散热器基板参考2024-04-23 -
阿兹姆·赫拉·艾科 Ar_4064 电线固定器 3D模型2024-04-23 -
高风险移动球门VEX2024-05-03 -
代莫斯面罩——来自彩虹六号：围城2024-05-04
最热下载
-
Flex Dino钥匙链2023-03-26 -
Dado - 立方体模型2024-03-24 -
沙箱建筑模型2024-05-08 -
螺旋锥形手玩具（全新）2024-05-08 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
HGX lite v2支架2025-07-18 -
比基尼模型2025-07-16 -
私密羞羞娱乐骰子2025-07-15 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
原神优菈2025-06-27